1 Preparation for Cabling the
NetServer LH 6000r
About Cabling the LH 6000r
NOTE
Before You Use this Reference Guide
This Rack Cabling Reference Guide assumes that you have the rack assembly
process completed, have mounted the HP NetServer LH 6000r, and are ready to
cable the components in the rack enclosure.
If you want a high-level checklist to use in this process, see Appendix A "Cabling
Checklist."
For instructions on how to install the HP NetServer LH 6000r in a rack, consult
the Installation Road Map shipped with your rack or the Installation Guide
shipped with your NetServer unit.
NOTE
The HP NetServer LH 6000r
This cabling reference is for the rack optimized HP NetServer LH 6000r shown in
Figure 1-1.
A checklist for the cabling process is included in Appendix A.
For instructions on how to assemble other components in a
rack, please find and follow the documentation shipped with
your rack components. If there is no such documentation with
your rack and components, check the separately orderable
installation kit. Or, use the generic rack assembly process
described in this chapter.
1