Preparation For Cabling The Netserver Lc 2000R; About Cabling The Lc 2000R; Before You Use This Reference Guide; The Hp Netserver Lc 2000R - HP D5970A - NetServer - LCII Reference Manual

Rack cabling reference guide

Hide thumbs Also See for D5970A - NetServer - LCII:

Table of Contents

1 Preparation for Cabling the

NetServer LC 2000r

NOTE

A checklist for the cabling process is included in Appendix A.

This Cabling Reference Guide assumes that you have the rack assembly process

completed, have mounted the HP NetServer LC 2000r, and are ready to cable the

components in the rack enclosure.

If you want a high-level checklist to use in this process, see Appendix A.

For instructions on how to install the HP NetServer LC 2000r in a rack, consult

the Installation Road Map shipped with your rack or the Installation Guide

shipped with your NetServer unit.

NOTE

For instructions on how to assemble other components in a

rack, please find and follow the documentation shipped with

your rack components. If there is no such documentation with

your rack and components, check the separately orderable

installation kit. Or, use the generic rack assembly process

described in this chapter.

This cabling reference is for the rack optimized HP NetServer LC 2000r shown in

Figure 1-1.

Table of Contents