Route And Tie Cables Into The Management Arm - HP D7171A - NetServer - LPr Manual

Chapter 3
A. Begin with
the Server all
the way in.
F. Dress
cables
through
the fingers
of the
Cable
Guide.
E. Determine whether to tie wrap
cables into the inner and outer
sections of the Arm.
Figure 3-10. Routing Cables through the Arm
2. Arrange cables through the slot on the inner section of the Arm. If needed,
secure cables in the cable arm using the hook-and-loop straps supplied
with the NetServer.
52
Procedure for Connecting and Routing Cables to the LH 6000r
B. Plug power and data
cables into the back of
the Server.
D. Arrange cables
through the inner
section of the arm,
around the elbow,
and through the
outer section.
C. Gather
Cables at left
Next to Cable
Management
Arm flange.