Hp Netserver Lh 6000/6000R Processor Upgrade; Introduction; Tools Required - HP LC2000r - NetServer - 128 MB RAM Upgrade Manual

1 HP NetServer LH 6000/6000r
Processor Upgrade

Introduction

The HP NetServer LH 6000/6000r supports up to six processor modules and the
accompanying voltage regulation modules (VRMs) on the system board assembly.
Processor modules are available at different clock speeds, but in a multi-processor
configuration, all processors must operate at the same speed.
You can use this upgrade accessory to replace an existing processor module
with a higher speed processor, or to add additional processor modules to a
single-processor system. See Figure 1-1.
3
2
Processor
1

Tools Required

The following tools are required to remove and replace processor modules and
there respective VRM.
An antistatic service kit (3M 8501/8502/8505 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap. Use this kit to prevent damage to the system from static electricity.
6
Processor
5
4
Figure 1-1. Processor and VRM Locations
3
2 6
5
4
1
VRM
Locations
3