Remove The Left Bezel Adapter; Mount The Hp Netserver Lt 6000R In The Rack - HP D7171A - NetServer - LPr Installation Manual

Chapter 2

Remove the Left Bezel Adapter

Remove the left bezel adapter from the HP NetServer.
1. Pull the adapter top upward to pull it free of the slot on the HP NetServer.
2. Pull out the tab at the middle of the adapter with a small screwdriver.
3. Pull the adapter away from the HP NetServer.
Tabs
4. Re-install the bezel on the front of the server.
a. Position the holes in the hinge bracket over the hinges.
b. Drop the bezel down over the hinge.

Mount the HP NetServer LT 6000r in the Rack

This section explains how to mount the HP NetServer LT 6000r in the rack.
WARNING Ensure that the rack's anti-tip precautions are in place to
prevent rack instability while mounting the HP NetServer LT
6000r. Mounting the server in a rack without anti-tip
precautions can result in injury and equipment damage.
Prepare the HP NetServer for Rack Mounting
Remove the Left Adapter
9