HP D7171A - NetServer - LPr Manual page 37

Chapter 3
HP NetServer
LH 6000r
Figure 3-1. Overview of Data Cabling of the HP NetServer LH 6000r to an
NOTE
Figure 3-1 shows an HP Console Switch, which is not
necessary for configuring the system, but is shown for
informational purposes.
NOTE The configuration in Figure 3-1 requires 1 UPS and 1 PDU at
120 V, 200/208 V, and at 220/230/240 V.
For 100 VAC applications, a 3000 VA UPS is required and 2
PDUs must be in place.
Procedure for Connecting and Routing Cables to the LH 6000r
Dashed Lines Indicate Dual Bus
Configured Storage
HP Rack Storage/12
Rack Storage/12
33