Preparation For Cabling The Netserver Lxr 8500; About Cabling The Lxr 8500; Before You Use This Cabling Reference Guide; The Hp Netserver Lxr 8500 - HP D5970A - NetServer - LCII Reference Manual

Rack assembly and cabling reference guide

Hide thumbs Also See for D5970A - NetServer - LCII:

Table of Contents

1 Preparation for Cabling the

NetServer LXr 8500

NOTE

A checklist for the cabling process is included in Appendix A.

This HP NetServer LXr 8500 Rack Assembly and Cabling Reference Guide

assumes that you have the rack assembly process completed, have mounted the

HP NetServer LXr 8500, and are ready to cable the components in the rack

enclosure.

If you want a high-level checklist to use in this process, see Appendix A.

For instructions on how to install the HP NetServer LXr 8500 in a rack, consult

the Installation Road Map shipped with your rack or the Installation Guide

shipped with your NetServer unit.

NOTE

For instructions on how to assemble other components in a

rack, please find and follow the documentation shipped with

your rack components. If there is no such documentation with

your rack and components, check the separately orderable

installation kit. Or, use the generic rack assembly process

described in this chapter.

This Cabling Reference Guide is for the rack-optimized HP NetServer LXr 8500

shown in Figure 1-1.

Table of Contents