Managing The Switch; Management Options For Core Switch 2/64 And San Director 2/128 - HP StorageWorks 2/64 - Core Switch Installation Manual

Managing the switch

You can use the management functions built into the Core Switch 2/64 and the SAN
Director 2/128 to monitor the fabric topology, port status, physical status, and other
information to aid in performance analysis and system debugging.
You can manage the Core Switch 2/64 and the SAN Director 2/128 using any of the
management options listed in
switch provider.
The Core Switch 2/64 and the SAN Director 2/128 include the Fabric OS and are
compatible with HP StorageWorks 1-Gb and 2-Gb SAN switches.
NOTE: For information about upgrading the Fabric OS, refer to the HP StorageWorks
procedures user guide for the Fabric OS version you want to use on your switch.
Table 2

Management options for Core Switch 2/64 and SAN Director 2/128

Management tool
Command line interface
For Ethernet, up to two admin sessions and four user sessions at the same
time. For details, refer to the HP StorageWorks procedures user guide and
the HP StorageWorks command reference guide for the Fabric OS version
running on your switch. Sectelnet and Secure Shell clients are both
supported.
Fabric Manager
Fabric Manager v4.4.x or later required. For information refer to the HP
StorageWorks Fabric Manager user guide.
Advanced Web Tools
For information refer to the HP StorageWorks Advanced Web Tools user
guide for the Fabric OS version running on your switch.
Standard SNMP applications
For information refer to the HP StorageWorks MIB reference guide for the
Fabric OS version running on your switch.
Management server
For information about MS, refer to the
guide
and the
OS version running on your switch.
Table
HP StorageWorks procedures user
HP StorageWorks command reference guide
Core Switch 2/64 and SAN Director 2/128 installation guide
2. For information about inband support, contact the
.
for the Fabric
Out-of-band
support
Ethernet or serial
connection
Ethernet
Ethernet
Ethernet
Ethernet
21