Wwn Bezel Leds; Wwn Bezel Led Patterns - HP StorageWorks 2/64 - Core Switch Installation Manual

NOTE: For more information about error messages, refer to the HP StorageWorks system error
messages reference guide for the Fabric OS version running on your switch.
Port Cards
(Slots 1-4 and 7-10)
Power LED
(upper LED)
Status LED
(lower LED)
Figure 19

WWN bezel LEDs

Table 13

WWN bezel LED patterns

LED location/purpose
16-port card/CP card
power
16-port card/CP card
status
Note: If a card slot or power supply bay has a filler panel installed, the corresponding LEDs on the WWN card
do not light up.
Power supply
power/status
(Slots 5 and 6)
Power LED
(upper LED)
1 2 3 4
Badge
Color
Steady green
Steady amber
No light (LED is OFF)
Steady green
Steady amber
Core Switch 2/64 and SAN Director 2/128 installation guide
CP Cards
scale:
5/16" = 1"
Status LED
(lower LED)
5 6 7 8 9 10
pwr4
pwr3
pwr2
pwr1
Status
Power is OK.
Card is faulty.
Card is OK.
Power is OK.
Power supply is faulty.
Power Supplies
Power LED/
Status LED
Captive
Screw (2x)
Recommended action
No action required.
Check card.
No action required.
No action required.
Check power supply.
77