Cp Card Led Patterns - HP StorageWorks 2/64 - Core Switch Installation Manual

Table 8

CP card LED patterns

LED location/ Color
purpose
Power Steady green
No light (LED is off)
Status No light (LED is off)
Steady yellow
Slow-flashing yellow
(on 2 seconds; then
off 2 seconds)
Fast-flashing yellow
(on 1/2 second; then
off 1/2 second)
Ethernet Link No light (LED is off)
Status (upper
LED beneath
Ethernet port)
Flickering
green/yellow
70 Operating the switch
Status
CP card is not
receiving power.
CP card is not
receiving power.
CP card is either
healthy or does not
have power.
CP card is faulty or
the switch is still
booting.
CP card is not seated
correctly or is faulty.
Environmental range
exceeded.
Either an Ethernet link
is not detected, or it
does not have
incoming power.
Ethernet link is healthy
and traffic is flowing
through port.
Recommended action
No action required.
Ensure card is firmly seated
and has power.
Verify that the power LED is
on.
Ensure card is firmly seated
and switch has completed
booting. If LED remains
yellow, consult switch
supplier.
Pull card out and reseat it. If
LED continues to flash,
replace card.
Check for out-of-bounds
environmental condition and
correct it.
Ensure the card has power,
Ethernet cable is firmly
seated, and connected
device is functioning.
No action required.