Zoneshow - Brocade Communications Systems SN3000B Command Reference Manual

zoneShow

Displays zone information.
SYNOPSIS
zoneshow [--sort] [pattern][, mode]
zoneshow --help
DESCRIPTION
Use this command to display zone configuration information. This command includes sorting and search
options to customize the output. If a pattern is specified, the command displays only matching match
zone configuration names in the defined configuration. When used without operands, the command
displays all zone configuration information for the Defined and the Effective configuration. Refer to
cfgShow for a description of this display.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When FCS policy is enabled, this command can be issued on any FCS switch in the fabric.
OPERANDS
This command has the following operands:
--sort
pattern
mode
--help
EXAMPLES
To display all zones:
Fabric OS Command Reference
53-1001764-01
Displays D,I zone members in ascending order.
A POSIX-style regular expression used to match zone configuration names. This
operand is optional. Patterns can contain:
•
A question mark (?) to match any single character.
•
An asterisk (*) to match any string of characters.
•
A range of characters to match any character within the range: for example,
[0-9] or [a-f].
Specify 0 to display the contents of the transaction buffer (the contents of the
current transaction), or specify 1 to display the contents of the nonvolatile
memory. The default value is 0. This operand is optional.
Displays the command usage.
switch:admin> zoneshow
Defined configuration:
cfg: cfg1
zone: blue
zone: red
Effective configuration:
cfg: cfg1
zone: red
red
44,5; 10:00:00:00:00:01:00:00; 3,4
3,4; 1,2; 4,5; 2,3
3,4
1,2
4,5
2,3
2
zoneShow
1085