Portlogdumpport - Brocade Communications Systems SN3000B Command Reference Manual

22

portLogDumpPort

portLogDumpPort
Displays the port log of a specified port without page breaks.
SYNOPSIS
portlogdumpport port_index
DESCRIPTION
Use this command to display the port log for a single port specified by its port index number. The
command displays all entries in the log without any page breaks. This command is identical to
portLogShowPort, except that portLogShowPort prompts you to press Enter to display the next page.
Port logs are circular log files in the switch firmware, which can save up to 65,536 entries depending on
the hardware platform. Use portLogConfigShow to display the current size of the port log. Once the log
has reached its maximum size, new entries displace the oldest ones. Port logs capture switch-to-device,
device-to-switch, switch-to-switch, some device-to-device1, and control information
If the port log is disabled while this command is executed, a warning message is displayed. Refer to
portLogClear command for more information.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
port_index
EXAMPLES
To display the port log dump for a port:
SEE ALSO
portLogDump, portLogClear, portLogShow,
736
Displays the port log for the a single port specified by its port index number. Use
switchShow for a listing of valid port index numbers.
switch:user> portlogdumpport 14
time task
------------------------------------------------
08:35:27.899 tShell
08:35:27.899 tReceive
08:35:27.916 tReceive
08:35:28.416 interrupt
08:35:28.433 tFabric
101d9910,0
08:35:28.433 tFabric
02fffffd,00fffffd,0005ffff,10000000
08:35:28.433 tReceive
c0fffffd,00fffffd,00050006
08:35:28.433 tReceive
03fffffd,00fffffd,00050006,02000000
08:35:28.433 tTransmit
c0fffffd,00fffffd,00050006
08:35:28.433 tFabric
103646d8,0
08:35:28.466 tFabric
(output truncated)
event port cmd args
pstate 14 OL1
pstate 14 LR2
pstate 14 AC
scn 14 1
ioctl 14 90 \
Tx 14 164 \
Rx 14 0 \
Rx 14 164 \
Tx 14 0 \
ioctl 14 91 \
ioctl 14 a7 3c,1
upTime
Fabric OS Command Reference
53-1001764-01