Sysmonitor - Brocade Communications Systems SN3000B Command Reference Manual

sysMonitor

Configures Fabric Watch thresholds for environment and system resources.
SYNOPSIS
sysmonitor --config class -area area
[-highthreshold -value value]
[-trigger above | below -action actions]
[-lowthreshold -value value]
[-trigger above | below -action actions]
[-buffer value] [-nosave]
sysmonitor --apply class -area area
[-action_level def | cust] [-thresh_level def | cust]
sysmonitor --cancel class -area area
[-action_level def | cust] [-thresh_level def | cust]
sysmonitor --pause | --continue class
-area area[,area,...] | all
-index index | all
sysmonitor --show [-class class][-area area]
[[-current]| [[-action_level def | cust]
[-thresh_level def | cust]]]
sysmonitor --config mem | cpu
[-poll polling_interval] [-retry number_of_retries]
[-limit high_usage_limit][-action action]
[-high_limi high_limit] [-low_limit low_limit]]
sysmonitor --show mem | cpu
sysmonitor --help
DESCRIPTION
Use this command to configure thresholds for Fabric Watch event monitoring for temperature and system
resources on the switch. The following operations are supported by this command:
•
•
Fabric OS Command Reference
53-1001764-01
Configure thresholds for Fabric Watch event monitoring and reporting for the environment and
resource classes. Environment thresholds enable temperature monitoring, and resource thresholds
enable monitoring of flash memory. This command follows a transaction model. Configuration
changes are saved persistently to nonvolatile storage, but the changes do not take effect until you
execute --apply. The --apply option allows you to toggle between default settings and your own
saved custom configuration and to apply actions and thresholds separately. You may choose to use
default thresholds together with a customized subset of available actions, or you may modify some
of the thresholds and use the default actions. Use the -nosave option to save the configuration
nonpersistently, and use --cancel to remove a nonpersistent configuration.
Configure memory or CPU usage parameters on the switch or display memory or CPU usage.
Configuration options include setting usage thresholds which, if exceeded, trigger a set of specified
Fabric Watch alerts. You can set up the system monitor to poll at certain intervals and specify the
number of retries required before Fabric Watch takes action. Configuring thresholds for CPU and
memory does not follow the transaction model of the typical Fabric Watch command. The --apply
and --cancel option are not valid in this context.
2
sysMonitor
1007