Brocade Communications Systems SN3000B Command Reference Manual page 965

To set the access control configuration:
To set the severity level for switch events and Fabric Watch alerts:
To enable the swFabricWatchTrap noninteractively:
To enable the swEventTrap of the SW-MIB category only (this operation disables all other SNMP traps
in this MIB category):
Fabric OS Command Reference
53-1001764-01
switch:admin> snmpconfig --set accessControl
SNMP access list configuration:
Access host subnet area in dot notation: [0.0.0.0] 192.168.0.0
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0] 10.32.148.0
Read/Write? (true, t, false, f): [true] f
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0] 10.33.0.0
Read/Write? (true, t, false, f): [true] f
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Committing configuration...done.
switch:admin> snmpconfig --set mibCapability
The SNMP Mib/Trap Capability has been set to support
SW-TRAP (yes, y, no, n): [yes]
swFCPortScn (yes, y, no, n): [yes]
swEventTrap (yes, y, no, n): [yes]
Desired Serverity Level (1- critical 2- error 3 \
-warning 4- informational 0 -None): 4
swFabricWatchTrap (yes, y, no, n): [yes]
Desired Serverity Level (1- critical 2- error 3 \
-warning 4- informational 0 -None): 2
[...]
switch:admin> snmpconfig
-mib_name SW-MIB -trap_name swFabricWatchTrap
Operation succeeded
switch:admin> snmpconfig
-mib_name SW-MIB -bitmask 0x10
Operation succeeded
switch:admin> snmpconfig
[...]
SW-TRAP: NO
swFault: NO
swSensorScn: NO
swFCPortScn: NO
swEventTrap: YES
DesiredSeverity:4
swFabricWatchTrap: NO
DesiredSeverity:2
swTrackChangesTrap: NO
swIPv6ChangeTrap: NO
--enable mibCapability \
--set mibCapability \
--show mibCapability
2
snmpConfig
939