Brocade Communications Systems SN3000B Command Reference Manual page 885

To display trunk details for a user assigned TA 25 that includes ports 24-25:
To configure a TA on an enterprise-class platform including ports 13 and 14 on slot 10 with port index of
125:
1.
2.
3.
4.
5.
SEE ALSO
portCfgTrunkPort, portCfgShow, portShow, switchCfgTrunk,
Fabric OS Command Reference
53-1001764-01
switch:admin> porttrunkarea --show trunk
Trunk Index 25: 25->0
bw: 16.000G deskew 15 MASTER
Tx: Bandwidth 16.00Gbps, Throughput 1.63Gbps (11.84%)
Rx: Bandwidth 16.00Gbps, Throughput 1.62Gbps (11.76%)
Tx+Rx: Bandwidth 32.00Gbps, Throughput 3.24Gbps (11.80%)
24->1
Tx: Bandwidth 16.00Gbps, Throughput 1.63Gbps (11.84%)
Rx: Bandwidth 16.00Gbps, Throughput 1.62Gbps (11.76%)
Tx+Rx: Bandwidth 32.00Gbps, Throughput 3.24Gbps (11.80%)
Disable the ports to be included in the TA.
Enable TA for ports 13 and 14 on slot 10 with port index of 125:
switch:admin> porttrunkarea --enable 10/13-14 -index 125
Trunk index 125 enabled for ports 10/13 and 10/14.
Show the TA port configuration (ports still disabled):
switch:admin> porttrunkarea --show enabled
Slot Port Type State
-------------------------------------------
10 13 -- --
10 14 -- --
-------------------------------------------
Enable ports 13 and 14:
switch:admin> portenable 10/13
switch:admin> portenable 10/14
Show the TA port configuration after enabling the ports:
switch:admin> porttrunkarea --show enabled
Slot Port Type State
-------------------------------------------
10 13 F-port Master
10 14 F-port Slave
sp: 8.000G \
sp: 8.000G bw: 8.000G deskew 15
Master TI DI
-- 125 125
-- 125 126
Master TI DI
10/13 125 125
10/13 125 126
portTrunkArea
switchShow
2
859