Fabricshow - Brocade Communications Systems SN3000B Command Reference Manual

fabricShow

Displays fabric membership information.
SYNOPSIS
fabricshow [-membership | -chassis]
fabricshow -help
DESCRIPTION
Use this command to display information about switches in the fabric.
If the switch is initializing or is disabled, the message "no fabric" is displayed.
Running this command on an FCR or edge switch does not provide any router information; running this
command on an edge switch with the -membership option does provide router information.
If the fabric is reconfiguring, some or all switches may not be displayed; otherwise, the following fields
are displayed depending on the command option used:
Switch ID
World Wide Name
Enet IP Addr
FC IP Addr
Name
FC Router IP Addr
FC Router Name
Chassis WWN
Chassis Name
Fabric Name
Fabric OS Command Reference
53-1001764-01
The switch Domain_ID and embedded port D_ID.
The switch WWN.
The switch Ethernet IP address for IPv4- and IPv6-configured switches. For IPv6
switches, only the static IP address displays.
The switch FC IP address.
The switch symbolic name. An arrow (>) indicates the principal switch.
The IP address of the FC Router. This field is empty if the switch is not an FC
Router or it the FC Router does not support it.
The FC Router symbolic name. This field is empty if the switch is not an FC
Router or it the FC Router does not support it.
The world wide name of the chassis. For switches running firmware versions that
do not distribute the chassis WWN, this field displays "NA".
The name of the chassis. For switches running firmware versions that do not
distribute the chassis name, this field displays "NA".
If the fabric has an assigned name, the fabric name is displayed at the end of the
command output.
2
fabricShow
255