Zonedelete - Brocade Communications Systems SN3000B Command Reference Manual

22

zoneDelete

zoneDelete
Deletes a zone.
SYNOPSIS
zonedelete "zonename"
DESCRIPTION
Use this command to delete a zone.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory using the cfgSave command. For the change to
become effective, enable the configuration with the cfgEnable command.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS
The following operand is required:
"zonename"
EXAMPLES
To delete the zone "Blue_zone":
SEE ALSO
zoneAdd, zoneCreate, zoneRemove,
1078
Specify the name of the zone to be deleted. Quotation marks are optional.
switch:admin> zonedelete "Blue_zone"
zoneShow
Fabric OS Command Reference
53-1001764-01