Switchshow - Brocade Communications Systems SN3000B Command Reference Manual

22

switchShow

switchShow
Displays switch and port status.
SYNOPSIS
switchshow
switchshow [-slot slot] -portname
switchshow [-portcount |-iscsi | -qsfp]
DESCRIPTION
Use this command to display switch, blade, and port status information. Output may vary depending on
the switch model.
When used without operands, switchShow displays the following information:
switchName
switchType
switchState
switchMode
switchRole
switchDomain
switchId
switchWwn
switchBeacon
zoning
FC Router
FC Router BB Fabric ID
Fabric Name
Allow XISL Use
982
Switch name.
Switch model and revision numbers.
Switch state: Online, Offline, Testing, or Faulty. When you issue the
switchcfgPersistentDisable command followed by the switchEnable
command, the switch state changes to, "Online (Temporary)". The switch remains
in this state until you issue the switchcfgPersistentEnable command.
Switch operation mode: Access Gateway (if AG is enabled).
Switch role: Principal, Subordinate, or Disabled.
Switch domain ID: 1 to 239.
Switch embedded port D_ID.
Switch world wide name (WWN).
Switch beaconing state: On or Off.
The name of the active zone is displayed in parentheses. Active only when
Access Gateway mode is disabled.
FC Router state: On or Off.
The backbone fabric ID for FC routing.
The name assigned to the fabric. The fabric name is set with the fabricName
command.
Allows the switch to use interswitch links (XILS) in the base fabric to carry traffic to
this logical switch. Values are ON or OFF.
Fabric OS Command Reference
53-1001764-01