Brocade Communications Systems SN3000B Command Reference Manual page 986

22
supportFtp
-R
-e
-d
EXAMPLES
To set the FTP parameters:
To display the FTP parameters:
To set FTP parameters interactively:
To set the time interval at which the FTP server connectivity is checked:
To enable auto file transfer:
To disable auto file transfer:
SEE ALSO
supportSave, supportShow,
960
Clears all supportFtp parameters.
Enables auto file transfer. Trace dump files are automatically transferred to a
designated FTP server. The server parameters must be set before you can enable
auto file transfer.
Disables auto file transfer.
switch:admin> supportftp -s -h 1080::8:800:200C:417A
-u admin -p password -d support -l sftp
supportftp: ftp parameters changed.
switch:admin> supportftp
Host IP Addr: 1080::8:800:200C:417A
User name:
Remote Dir:
Auto Upload protocol:
Auto-FTP: Off
switch:admin> supportftp -s
Host IP Addr[1080::8:800:200C:417A]:192.168.67.126
User Name[admin]: admin
Password[********]:password
Remote Dir[support]:
Auto upload protocol[ftp]:scp
Auto file transfer parameters changed
switch:admin> supportftp -t 24
supportftp: ftp check period changed.
switch:admin> supportftp -e
support auto file transfer enabled.
switch:admin> supportftp -d
support auto file transfer disabled.
traceDump
admin
support
sftp
\
Fabric OS Command Reference
53-1001764-01