PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications
8.10.12
CF_PIPSIZE Command
Command
"CF_PIPSIZE_%1_%2" [CR]
"1" -------------------- Set main picture size to 10%
"2" -------------------- Set main picture size to 20%
"3" -------------------- Set main picture size to 30%
"4" -------------------- Set main picture size to 40%
"5" -------------------- Set main picture size to 50%
%1
"6" -------------------- Set main picture size to 60%
"7" -------------------- Set main picture size to 70%
"8" -------------------- Set main picture size to 80%
"9" -------------------- Set main picture size to 90%
"10" ------------------ Set main picture size to 100%
"1" -------------------- Set sub picture size to 10%
"2" -------------------- Set sub picture size to 20%
%2
"3" -------------------- Set sub picture size to 30%
"4" -------------------- Set sub picture size to 40%
"5" -------------------- Set sub picture size to 50%
Set display size of "Picture in Picture".
Details
(Valid only when in the normal Power ON status.)
*When "Picture in Picture" is set to Off, return "101" [CR]
Acceptable
Response
Unacceptable
8.10.13
CF_PIPPOSITION Command
Command
"CF_PIPPOSITION_%1" [CR]
"POS1" -------------------- Move main picture position to up
"POS2" -------------------- Move main picture position to down
"POS3" -------------------- Move main picture position to left
"POS4" -------------------- Move main picture position to right
%1
"POS5" -------------------- Move sub picture position to up
"POS6" -------------------- Move sub picture position to down
"POS7" -------------------- Move sub picture position to left
"POS8" -------------------- Move sub picture position to right
Set position of "Picture in Picture".
(Valid only when in the normal Power ON status.)
This function is worked from the first reception of Command.
Details
* When setting beyond the area of movement is carried out, return Error Code
"101" [CR] and the command is not executed.
Ex.) When movement to right side has already reached limit; and "RIGHT" is
received.
*When "Picture in Picture" is set to Off, return "101" [CR]
Acceptable
Response
Unacceptable
8.10.14
CF_PIPFRAMELOCK Command
Command
"CF_PIPFRAMELOCK_%1" [CR]
"MAIN" -------------------- Set to main picture
%1
"SUB" --------------------- Set to sub picture
Set Frame lock of "Picture in Picture".
Details
(Valid only when in the normal Power ON status.)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
44/89