PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications
9.11.32 CR_PTIMEMODE Command
Command
"CR_PTIMEMODE" [CR]
Details
Get setting status of count up/down mode in P-timer
Acceptable
Response
%1
Unacceptable
9.11.33 CR_PTIMER Command
Command
"CR_PTIMER" [CR]
Details
Get setting status of P-timer
Acceptable
Response
%1
Unacceptable
9.11.34 CR_PTIME Command
Command
"CR_PTIME" [CR]
Details
Get setting time for count down mode of P-timer
Acceptable
Response
%1
Unacceptable
9.11.35 CR_KEYDIS Command
Command
"CR_KEYDIS" [CR]
Details
Get status of RC/KEY (valid or invalid)
Acceptable
Response
%1
Unacceptable
9.11.36 CR_SECURITY Command
Command
"CR_ SECURITY" [CR]
Details
Get ON/OFF setting status of Security on menu.
Acceptable
Response
%1
Unacceptable
"000_%a" [CR]
"COUNTUP" -------------------- Set P-timer to Count up mode
"COUNTDN" -------------------- Set P-timer to Count down mode
"Error Code" [CR]
"000_%a" [CR]
"ON" -------------------- P-timer is activated
"STOP" ---------------- P-timer is
"OFF" ------------------ Exit P-timer function
"Error Code" [CR]
"000_%a" [CR]
"001" – "180" ----------------------- 1 to 180 minutes
"Error Code" [CR]
"000_%1" [CR]
"NONE" -------------------------- RC and KEY, both are valid
"RC" ------------------------------- RC is invalid
"KEY" ----------------------------- KEY is invalid
"Error Code" [CR]
"000_%1" [CR]
"ON" ------------ PJ is locked
"OFF" ----------- PJ is not locked.
"Error Code" [CR]
83/89
temporarily suspended