PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications
8.4.5
CF_IRIS Command
Command
"CF_IRIS_%1" [CR]
"OFF" ---------------- Set Iris function to OFF
%1
"ON" ------------------- Set Iris function to ON
Set Iris function to ON/OFF. (Available only in the normal Power ON status)
The setting status with this command will not be stored in the projector's memory.
Details
Therefore, when the power is turned to ALL OFF status, the value returns to the
original setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
8.4.6
CF_SHARP Command
Command
"CF_SHARP_%1" [CR]
"000-031"--------------- Directly specify setting value of Sharpness
%1
"UP"--------------------- Increment setting value of Sharpness by 1
"DN"--------------------- Decrement setting value of Sharpness by 1
Set user controlled value of Sharpness (Available only in the normal Power ON
status)
Details
The value set by this command will not be stored in the projector's memory.
Therefore, when the power is turned to ALL OFF status, the value returns to the
original setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
8.4.7
CF_GAMMA Command
Command
"CF_GAMMA_%1" [CR]
"000-015"---------------- Directly specify setting value of Gamma
%1
"UP"---------------------- Increment setting value of Gamma by 1
"DN"---------------------- Decrement setting value of Gamma by 1
Set user controlled value of Gamma (Available only in the normal Power ON
status)
Details
The value set by this command will not be stored in the projector's memory.
Therefore, when the power is turned to ALL OFF status, the value returns to the
original setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
20/89