Cr_Ddots Command; Cr_Dline Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications
9.5.6

CR_DDOTS Command

Command "CR_DDOTS" [CR]
Details Get value of Display Dots
Acceptable
%1
Response
Unacceptable
9.5.7

CR_DLINE Command

Command "CR_DLINE" [CR]
Details Get value of Display Line
Acceptable
%1
Response
Unacceptable
"000_%1" [CR]
"0100 – nnnn"
(nnnn = Total Dots – Position H)
"Error Code" [CR] ---- When command is not available in the
given condition (such as being selected input
"?" [CR] -------------------- When unknown command is received
"000_%1" [CR]
"0100 – nnnn"
(nnnn = Total Line – Position V)
"Error Code" [CR] ---- When command is not available in the
given condition (such as being selected input)
"?" [CR] -------------------- When unknown command is received
61/89