Cf_Pipsubinpu Command; Cf_Pipsize Command - Sanyo PDG-DHT8000L - 8000 Lumens Specifications

PDG-DHT8000L Expand Serial Command Functional Specifications

8.9.10 CF_PIPSUBINPU Command

Command "CF_PIPSUBINP_%1_%2" [CR]
"1" -------------------- Select Input 1
"2" -------------------- Select Input 2
%1
"3" -------------------- Select Input 3
"4" -------------------- Select Input 4
"DIGITAL" ---------------- Select DVI Input
"ANALOG" --------------- Select Analog Input
"VIDEO" ------------------- Select Composite Video Input
"S-VIDEO" ---------------- Select S-Video input
"YPBPR" ------------------ Select Y/Pb/Pr Input
%2 "YCBCR" ------------------ Select Y/Cb/Cr Input
"SDI1" --------------------- Select SDI 1 Input
"SDI2" --------------------- Select SDI 2 Input
"SCART" ------------------ Select SCART Input
"HDCP" -------------------- Select HDCP Input
"HDMI" -------------------- Select HDMI Input
Select input and source of Sub picture of "Picture in Picture". (Valid only when in
the normal Power ON status.)
* In the case of a specific status, return "101" [CR] and the command is not
executed.
Details - When selected Source does not meet the requirement for Input
- When transmitted command of the input without inserting Board in Input3
- When selected Input / Source which was impossible of choice by limit of
Acceptable
Response
Unacceptable

8.9.11 CF_PIPSIZE Command

Command "CF_PIPSIZE_%1_%2" [CR]
"1" -------------------- Set main picture size to 10%
"2" -------------------- Set main picture size to 20%
"3" -------------------- Set main picture size to 30%
"4" -------------------- Set main picture size to 40%
"5" -------------------- Set main picture size to 50%
%1
"6" -------------------- Set main picture size to 60%
"7" -------------------- Set main picture size to 70%
"8" -------------------- Set main picture size to 80%
"9" -------------------- Set main picture size to 90%
"10" ------------------ Set main picture size to 100%
"1" -------------------- Set sub picture size to 10%
"2" -------------------- Set sub picture size to 20%
%2 "3" -------------------- Set sub picture size to 30%
"4" -------------------- Set sub picture size to 40%
"5" -------------------- Set sub picture size to 50%
Set display size of "Picture in Picture". (Valid only when in the normal Power ON
Details status.)
*When "Picture in Picture" is set to Off, return "101" [CR]
Acceptable
Response
Unacceptable
or Input4
"Picture in Picture"
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
41/101