Cf_Cornertestpat Command; Cf_Ceil Command; Cf_Rear Command; Cf_Screenaspect Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications

8.7.13 CF_CORNERTESTPAT Command

Command "CF_CORNERTESTPAT_%1"[CR]
"RED" ------------Select Red
"WHITE" -------- Select White
%1
"BLUE" ---------- Select Blue
"OFF" ------------ Select Off
Display test patterns for Corner correction.
(Available in normal Power ON status only)
Details
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
Acceptable
Response
Unacceptable

8.7.14 CF_CEIL Command

Command "CF_CEIL_%1" [CR]
"ON" --------------------------- Set Ceiling to ON.
%1
"OFF" ------------------------- Set Ceiling to OFF.
Set/Cancel Ceiling mode.(Available only in the normal Power ON status)
Details The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.7.15 CF_REAR Command

Command "CF_REAR_%1" [CR]
"ON" --------------------------- Set Rear to ON.
%1
"OFF" ------------------------- Set Rear to OFF.
Set/Cancel Rear mode (Available only in the normal Power ON status)
When Rear is ON, projected image is left/right reversed.
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.7.16 CF_SCREENASPECT Command

Command "CF_SCREENASPECT_%1"[CR]
"43MODE"
%1 "169MODE" ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e Select 16ÿ 9 mode
"1610MODE" ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e Select 16ÿ 10 mode
Set Screen aspect mode.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e Select 4ÿ 3 mode
"000"[CR]
"Error Code"[CR]
37/89