Error Code Table - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications
7

Error Code Table

Error Code
?
000
101
102
103
201
301
402
Note) These error codes are applied to Expand Command, not to Basic Command
Contents
-When the received data cannot be decoded
-Parameter designation error (wrong digit number,
including invalid value, etc.)
Normal reception (This is "Not" error)
The function is not available in the selected Mode
Selected value is out of range (Not reflected)
Command mismatched to Hardware (the command
is for Optional function which is not implemented)
Incremented or decremented value or values are
beyond upper or lower limits.
Not executable due to screen capturing in process.
Prompting reissue of the command after a while.
Not executable due to PIN code in operation.
Prompting reissue of the command after a while.
17/89