Cf_Pipmaininp Command; Cf_Pipsubinpu Command; Cf_Pipsize Command - Sanyo PLC-WM4500/L - 4500 Lumens Manual

PLC-WM4500/WM4500L Expand Serial Command Functional Specifications

8.10.9 CF_PIPMAININP Command

Command "CF_PIPMAININP_%1_%2" [CR]
"1" -------------------- Select Input 1
%1 "2" -------------------- Select Input 2
"3" -------------------- Select Input 3
"ANALOG" --------------- Select Analog Input
"VIDEO" ------------------- Select Composite Video Input
"S-VIDEO" ---------------- Select S-Video input
%2 "YPBPR" ------------------ Select Y/Pb/Pr Input
"YCBCR" ------------------ Select Y/Cb/Cr Input
"SCART" ------------------ Select SCART Input
"HDMI" -------------------- Select HDMI Input
Select input and source of Main picture of "Picture in Picture". (Valid only when in
Details
the normal Power ON status.)
Acceptable
Response
Unacceptable

8.10.10 CF_PIPSUBINPU Command

Command "CF_PIPSUBINP_%1_%2" [CR]
"1" -------------------- Select Input 1
%1 "2" -------------------- Select Input 2
"3" -------------------- Select Input 3
"ANALOG" --------------- Select Analog Input
"VIDEO" ------------------- Select Composite Video Input
"S-VIDEO" ---------------- Select S-Video input
%2
"YPBPR" ------------------ Select Y/Pb/Pr Input
"YCBCR" ------------------ Select Y/Cb/Cr Input
"SCART" ------------------ Select SCART Input
"HDMI" -------------------- Select HDMI Input
Select input and source of Sub picture of "Picture in Picture". (Valid only when in
Details
the normal Power ON status.)
Acceptable
Response
Unacceptable

8.10.11 CF_PIPSIZE Command

Command "CF_PIPSIZE_%1_%2" [CR]
"1" -------------------- Set main picture size to 10%
"2" -------------------- Set main picture size to 20%
"3" -------------------- Set main picture size to 30%
"4" -------------------- Set main picture size to 40%
"5" -------------------- Set main picture size to 50%
%1
"6" -------------------- Set main picture size to 60%
"7" -------------------- Set main picture size to 70%
"8" -------------------- Set main picture size to 80%
"9" -------------------- Set main picture size to 90%
"10" ------------------ Set main picture size to 100%
"1" -------------------- Set sub picture size to 10%
"2" -------------------- Set sub picture size to 20%
%2 "3" -------------------- Set sub picture size to 30%
"4" -------------------- Set sub picture size to 40%
"5" -------------------- Set sub picture size to 50%
Set display size of "Picture in Picture". (Valid only when in the normal Power ON
Details
status.) *When "Picture in Picture" is set to Off, return "101" [CR]
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
39/78