PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications
8.9
Sound Command
8.9.1
CF_VOLUME Command
Command
"CF_VOLUME_%1" [CR]
"000-063" --------------------------- Directly specify value of Volume.
%1
"UP" --------------------------------- Increment setting value of Volume by 1
"DN" --------------------------------- Decrement setting value of Volume by 1
Control level of Volume (Available only in the normal Power ON status)
Set Volume Up/Down the same way as RC and also directly specify value of
Volume. When setting Volume value, the Sound Mute ON status is canceled
Details
just like RC operation. The value set by this command is stored in Projector's
memory.
* When input signal is Network, error code "101" is returned.
Acceptable
Response
Unacceptable
8.9.2
CF_MUTE Command
Command
"CF_MUTE_%1" [CR]
"ON" ----------------------------- Set Sound Mute to ON
%1
"OFF" --------------------------- Set Sound Mute to OFF
Control ON/OFF of Sound Mute (Available only in the normal Power ON status)
Details
* When input signal is Network, error code "101" is returned.
Acceptable
Response
Unacceptable
8.9.3
CF_BLTINSP Command
Command
"CF_BLTINSP_%1" [CR]
"ON" ----------------------------- Set Built-in speaker to ON
%1
"OFF" --------------------------- Set Built-in speaker to OFF
Control ON/OFF of Built-in speaker
Details
(Available only in the normal Power ON status)
* When input signal is Network, error code "101" is returned.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
39/89