Cr_Syslist Command; Cr_Modelist Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications
9.7.8

CR_SYSLIST Command

Command "CR_SYSLIST" [CR]
Details Get possible systems for System list
Acceptable
Response
%1
Unacceptable
9.7.9

CR_MODELIST Command

Command "CR_MODELIST" [CR]
Details Get possible modes for Mode list
Acceptable
Response
%1
Unacceptable
"000_%1_%2_---_%x" [CR]
Error Code "101" is returned for no signal.
Otherwise following values are returned according to Source.
When input is PC-Analog;
"XGA1" --------------------------------- XGA1 is in the list
"1080I" --------------------------------- 1080i is in the list
"1080PSF/24" ------------------------ 1080psf/24 is in the list
"1080PSF/25" ------------------------ 1080psf/25 is in the list
"1080PSF/30" ------------------------ 1080psf/30 is in the list
* Auto, Mode1-10 shall not be returned.
When input is PC-digital, AV-HDCP or HDMI;
"D-XGA" ------------------------------- D-XGA is in the list
"D-720P" ------------------------------- D720p is in the list
"D-1080PSF/24" --------------------- D1080psf/24 is in the list
"D-1080PSF/25" --------------------- D1080psf/25 is in the list
"D-1080PSF/30" --------------------- D1080psf/30 is in the list
When input is Y,Pb/Cb,Pr/Cr;
All possible systems in Menu, including Auto, are returned;
"AUTO" --------------------------------- Auto is in the list
"1080I" ----------------------------------- 1080i is in the list
"1035I" ----------------------------------- 1035i is in the list
:
"575I" ------------------------------------- 575i is in the list
"480I" ------------------------------------- 480i is in the list
When input is Video or S-video;
All possible systems in Menu, including Auto, are returned;
"AUTO" ----------------------------------- Auto is in the list
"PAL" -------------------------------------- PAL is in the list
"SECAM" --------------------------------- SECAM is in the list
:
"PAL-N" ------------------------------------ PAL-N is in the list
"Error Code" [CR]
"000_%1_%2_---_%x" [CR]
Error Code "101" is returned except for PC-Analog and for no
signal with PC-Analog
Possible modes in Mode1-10 are returned when PC-Analog
signal is coming.
"MODE1"
"MODE2"
"MODE3"
:
:
"MODE8"
"MODE9"
"MODE10"
"Error Code" [CR]
68/89