Input Read Command; Cr_Input Command; Cr_Source Command; Cr_Srcinp1 Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications

9.7 Input Read Command

9.7.1

CR_INPUT Command

Command "CR_INPUT" [CR]
Details Get selected INPUT No.
Acceptable
Response
%1
Unacceptable
9.7.2

CR_SOURCE Command

Command "CR_SOURCE" [CR]
Details Get selected source
Acceptable
%1
Response
Unacceptable
9.7.3

CR_SRCINP1 Command

Command "CR_SRCINP1" [CR]
Details Get Source of INPUT1
Acceptable
Response
%1
Unacceptable
9.7.4

CR_SRCINP2 Command

Command "CR_SRCINP2" [CR]
Details Get Source of INPUT2
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"1 – 4"
"Error Code" [CR]
"000_%1" [CR]
"DIGITAL" --------------- RGB (PC Digital) is selected
"ANALOG" -------------- RGB (PC Analog) is selected
"SCART" ----------------- RGB (Scart) is selected
"HDCP" ------------------ RGB (AV HDCP) is selected
"HDMI" --------------------HDMI is selected
"VIDEO" ------------------ Video is selected
"S-VIDEO" --------------- S-Video is selected
"YPBPR" ----------------- Y,Pb/Cb,Pr/Cr is selected
"NETWORK" ------------ Network is selected
"Error Code" [CR] --- When command is not available in the given
condition (such as being selected input)
"?" [CR] ---------------- When unknown command is received
"000_%1" [CR]
"DIGITAL" ---------------------- in PC Digital mode
"ANALOG" ---------------------- in PC Analog mode
"SCART" ------------------------ in Scart mode
"HDCP" ------------------------- in AV HDCP mode
"HDMI" --------------------------- in HDMI mode
"Error Code" [CR]
"000_%1" [CR]
"VIDEO" --------------------- in Video mode
"YPBPR" -------------------- in Y,Pb/Cb,Pr/Cr mode
"ANALOG" ------------------ in RGB mode
"Error Code" [CR]
65/89