Lamp Status Read Command; Cr_Lamprepl Command; Cr_Lamph Command; Cr_Lampcorresph Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications

9.9 Lamp Status Read Command

9.9.1

CR_LAMPREPL Command

Command "CR_LAMPREPL" [CR]
Details Get information of Lamp Replacement time
Acceptable
Response
%1
Unacceptable
9.9.2

CR_LAMPH Command

Command "CR_LAMPH" [CR]
Get Lamp running time (in hours)
Details
* return actual lamp running time
Acceptable
Response
%1
Unacceptable
9.9.3

CR_LAMPCORRESPH Command

Command "CR_LAMPCORRESPH" [CR]
Get Lamp running time (in hours)
Details
*return lamp running time multiplied by a coefficient (not actual running time)
Acceptable
Response
%1
Unacceptable
9.9.4

CR_LAMPMODE Command

Command "CR_LAMPMODE" [CR]
Details Get setting status of Lamp mode
Acceptable
Response
%1
Unacceptable
9.9.5

CR_LAMPSTS Command

Command "CR_LAMPSTS" [CR]
Details Get Lamp status
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"1Y" ----------------- indicates over lamp replacement time
"1N" ----------------- indicates under lamp replacement time
"?" [CR]
"000_%1" [CR]
"00000 - 99999"
"Error Code" [CR]
"000_%1" [CR]
"00000 – 99999"
"Error Code" [CR]
"000_%1" [CR]
"NORMAL" --------------- Lamp mode is Normal status
"ECO1" -------------------- Lamp mode is Eco1 status
"ECO2" -------------------- Lamp mode is Eco2 status
"AUTO" -------------------- Lamp mode is Auto status
"?" [CR]
"000_%1" [CR]
"1I" ------------------------ Lamp is ON
"1O" ---------------------- Lamp is OFF
"1X" ----------------------- Lamp Failure
"Error Code" [CR]
73/89