Cf_Power Command; Cf_Freeze Command; Cf_Vmute Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications

8.11.3 CF_POWER Command

Command "CF_POWER_%1" [CR]
"ON" ----------------------------- Power ON
"OFF" --------------------------- Power OFF
* Issuing another command during countdown process forced countdown
operation to be terminated.
* Error Code is returned in some projector statuses, which indicates the command
%1
is impossible to be executed. (See [8.3] for details)
* Returning the response "000" [CR] (acceptable) does not always mean that the
status has already changed to Power ON.
Ex) When the temperature approaches abnormal status after returning "000"
[CR] to the command CF_POWER ON.
Therefore, to get the projector status requires using Status Read command.
Details Set Power to ON/OFF
Acceptable
Response
Unacceptable

8.11.4 CF_FREEZE Command

Command "CF_FREEZE_%1" [CR]
"ON" --------------------------- Set Freeze to ON.
"OFF" ------------------------- Set Freeze to OFF.
%1 "UP" --------------------------- Switch between ON and OFF.
"DN" --------------------------- Switch between ON and OFF.
* The same operation for "UP" and "DN" as this model has only "ON" / "OFF".
Set / Cancel Freeze function. (Available only in the normal Power ON status)
Details Receiving FREEZE_ON command when the projector is Freeze enabled, Freeze
status is kept.
Acceptable
Response
Unacceptable

8.11.5 CF_VMUTE Command

Command "CF_VMUTE_%1" [CR]
"ON"------------------ Set Video Mute (Shutter Close)
%1
"OFF" ----------------Cancel Video Mute (Shutter Open)
Details Set / Cancel Video Mute. (Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
54/89