Other Serial Port Protocol Profile: Serial-Connected Master
When to Use
Configuration Options
Locating Setup Information
Chapter 4
Configuring Industrial Automation (IA)
Other Serial Port Protocol Profile: Serial-Connected Master
Use this profile if you want to connect a master device to the serial port
using any IA serial port protocol not previously discussed.
In this configuration, you do not set up the port of the device server for an
IA protocol. You simply configure the standard serial port parameters
required by the attached master, such as line speed, number of data bits,
and parity scheme and then configure the port for autoconnection.
See "Configuring a Serial-Connected Master: Other IA Protocol" on page
66.
63