Digi TS 4 MEI User Manual page 73

Chapter 5 Configuring Wireless Devices
The home page appears.
9. Click Network > Wireless LAN.
10. Enter parameters, click Apply to save.
.
11. Click Reboot for changes to take effect.
WARNING!!!!! Changing the Advanced Network Settings could cause
you to 'lose' your device on the Network. Digi International recommends
that you do NOT alter the Advanced Network Settings. If you alter these
settings, you may need to reset your device with the reset button and
reconfigure your device as if it were new. See "Resetting Configuration
to Factory Defaults" on page 101 for instructions.
Be advised these settings are correct for most environments.
12. Unplug the Ethernet cable from the Digi device, disconnect the power,
and power the unit up (reboot).
Configuration is complete.
Configuration Considerations
73