Digi TS 4 MEI User Manual page 92

Configure Outlets
92
3. The Power Outlet Configuration page is displayed.
• In the Device Name field, enter a name for the device plugged into
this power outlet. If you give the same device name to multiple
devices, such as "router," they can be managed as a single entity.
For example, multiple servers that have been assigned the same
Device Name can be shut down or rebooted.
• If the powered device is a serial device, in the Serial Port field,
specify the serial port to which the powered device is connected.
• In the Power Management Access section, configure user access
permissions to the outlet.
Users can be assigned permission to manage the outlet. A user with
access permissions to the outlet will have the option to power a
connected device on or off or reboot the device.
Individual users must already be configured before they can be
assigned to manage power outlets. To add users, go to
Configuration > Users.
Users that currently have permission to control the outlet are listed
in the Username/Action table.
To allow a user access permissions to the outlet: In the bottom
row, select a Username and click Add.
To restrict a user from accessing the outlet: Click Remove.
Apply these users to all outlets with the same device name:
Apply these users to all outlets with the same serial port:
These options allow you to easily assign the same users to manage
each outlet with the same device name or serial port.
4. Click Apply and repeat steps 2-3 for each outlet you want to configure.
Chapter 9 Digi Remote Power Manager (Digi RPM)