Digi TS 4 MEI User Manual page 16

Quick Reference for Configuring Features
Feature/Task
Industrial Automation (IA):
• Protocol conversion
between Modbus, Allen-
Bradley, and ASCII device
• Allen-Bradley Ethernet-to-
Serial Bridging
• Omron Hostlink Multi-Master
• Modbus Ethernet-to-Serial
Bridging
• Custom (user-defined)
Multi-Master Protocol
IP routing
MEI
Modem emulation
Port buffering
Port logging
Port profiles
16
Digi Devices
supported in
Digi One IAP
Digi One IAP
Digi One IAP
Digi One IA
Digi One IAP
PortServer TS Family
Digi One IAP
PortServer TS Family
All
PortServer TS 8/16 ME
Family
Digi One SP
Digi One IA
PortServer TS Family
PortServer TS Family
Digi One IAP
PortServer TS Family
All devices that support
the default Web user
interface
Web User Interface Path to Feature
Applications > Industrial Automation >
"launch Industrial Automation Wizard"
Running the Industrial Automation Wizard is
the recommended method for initial
configuration of any IA equipment.
See the online help for the Wizard and this
web page: http://www.digi.com/applications/
industrialautomation/index.jsp.
Configurable from command line only.
The commands to configure IP routing are
"set route" and "set forwarding.
Configuration > System > MEI
(only maximum baud rate is configurable)
Configuration > Serial Ports > port >
MEI Serial Settings
Configuration > Serial Ports > port >
Port Profile > Modem Emulation
See the Digi One and PortServer TS Family
Command Reference for modem emulation
commands.
To enable port buffering:
Configuration > Serial Ports > port > Console
Management Profile
or
Configuration > Serial Ports > port >
Advanced Serial Settings
To display contents of a port buffer:
Management > Serial Ports > Port Logs
Configuration > Serial Ports > port >
Advanced Serial Settings > Enable Port
Logging
Configuration > Serial Ports > port >
Port Profile
Chapter 1 Introduction