Digi TS 4 MEI User Manual page 17

Feature/Task
Port sharing: allowing more
than one client to open a serial
port through RealPort, reverse
Telnet, reverse SSH, or
connect.
Power Features:
• Power through Integrated
Remote Power Management
(Digi RPM)
• Power Over Ethernet (POE)
• Power Over Ports/Power
Over Serial
PPP (Point-to-Point Protocol)
RealPort
Remote login (rlogin)
Revert configuration settings
Chapter 1 Introduction
Digi Devices
supported in
All; console menu feature
available on PortServer
TS Family devices only.
PortServer TS Family
Digi One IAP
PortServer TS P MEI
Family
PortServer TS P MEI
Family
PortServer TS Family
All
All
All
Quick Reference for Configuring Features
Web User Interface Path to Feature
By choosing the Console Management port
profile for a serial port:
Configuration > Serial Ports > port >
Port Profile > Console Management
or
By the Advanced Serial Settings:
To configure port sharing: Configuration >
Serial Ports > port > Advanced Serial
Settings > Enable multiple systems to
simultaneously connect
To configure Digi RPM: Serial Ports > port >
Port Profile > Power Management
To manage Digi RPM: Management > Power
This is a hardware feature. There are no
configurable software settings for this
feature.
This is a hardware feature. Enabling it
involves changing a jumper inside the device.
To display the status of the circuit breaker
and reset as needed, Administration >
Device Information > Serial Ports &
Diagnostics > port
Applications > PPP
Configuration > Serial Ports > port >
Port Profile > RealPort Profile
See also the RealPort Setup Guides for
details on configuring RealPort.
Users > user > User Settings > Access
Method
Users > user > Advanced Settings
For ports configured with the TCP Sockets
port profile, the TCP Client settings:
Configuration > Serial Ports > port >
Port Profile > TCP Sockets > TCP Client
To revert all device settings, with the option to
keep IP address settings:
Administration > Factory Default Settings
To revert serial port settings for a serial port,
including port-specific security settings:
Configuration > Serial Ports > port >
Restore Factory Serial Port Settings
17