Digi TS 4 MEI User Manual page 89

Chapter 9 Digi Remote Power Manager (Digi RPM)
5. In the Profile Settings part of the page, select whether the power
controller settings will be automatically detected or whether you will
configure the settings yourself.
• Automatically Detect Power Controller: Configuration settings for
the Digi RPM are automatically detected after clicking Apply. Once
the Digi RPM is detected, the settings are populated on the page.
The Manually Configure Power Controller option is selected,
allowing you to edit the settings as needed. You can correct the
number of ports, if necessary, or edit the port title.
• Manually Configure Power Controller: Configuration settings for
the Digi RPM power controller are manually entered. Enter the
following, then click Apply:
Manufacturer: Select the manufacturer of the power controller.
Outlets: Enter the number of outlets on the Digi RPM power
controller.
Configure Digi RPM Settings
89