Network Settings
26
4. Enter a host name for a group of network devices.
5. Enter the Base Socket. The base socket determines the network port
(socket) on this Digi terminal server that another network device (such
as another Digi terminal server or a PC) uses to communicate using the
Digi device's serial port services. These services include Telnet, raw
TCP/UDP, and SSL.
Most applications can leave this value unchanged. To calculate these
settings:
•
Telnet port = Base Socket + Serial Port Number
•
Raw port = Base Socket + 100 + Serial Port Number
•
SSL port = Base Socket + 600 + Serial Port Number
For example:
Service
telnet
raw (TCP or UDP)
SSL
6. Click Apply.
7. Click Reboot for changes to take effect.
Base Socket
2000
2000
2000
Chapter 3 Configuring Network and Serial Port Settings
Network Port
2001
2101
2601