Configuring The Portserver Ts 1/3 M Mei - Digi TS 4 MEI User Manual

Embedded Modem

Configuring the PortServer TS 1/3 M MEI

80
1. Follow the Digi Device Setup Wizard from the CD to assign an IP
address to the Digi device.
2. If the wizard scenarios need additional configuration, login to the device
IP from the URL.
3. Select Serial Ports > Change profile
4. Select the appropriate profile (Custom shows all options)
5. Enter the appropriate parameters and click Apply to save.
6. Click Reboot for changes to apply.
Chapter 7 Configuring Embedded Modem