Digi TS 4 MEI User Manual page 50

System Configuration
Configure Outgoing PPP Connections
Configure Advanced PPP Settings
50
For outgoing connections, CHAP or PAP authentication, or password
configuration, use the following procedure.
1. Click Outgoing Connections.
CHAP authentication can be used to restrict PPP user access to
outbound ports.
2. Enter the appropriate parameters and click Apply.
3. Click Reboot for changes to take effect.
For dynamic routing or proxy ARP settings, follow the procedure for
configuring advanced PPP settings.
1. Click Advanced PPP settings. As needed, use the Help button for
more information about configuring advanced PPP settings.
2. Select Enable Dynamic Routing (RIPv1).
3. Select the passive or active route setting.
4. Select the Process ARP requests if appropriate.
5. Click Apply.
Chapter 3 Configuring Network and Serial Port Settings