For A Netserver In An Hp Rack - HP D5970A - NetServer - LCII Manual

Chapter 2
Figure 2-21. Replace Front Bezel on Pedestal NetServer
6. Lock the front bezel with the key, if desired.

For a NetServer in an HP Rack

For an HP NetServer in an HP rack, refer to the NetServer documentation and
your rack documentation as you do the following to replace Cover 1 and the front
bezel:
1. Insert the tabs inside the rear edge of Cover 1 into the slots at the rear of
the NetServer chassis.
2. Slide Cover 1 toward the rear of the NetServer, as shown in Figure 2-22.
30
Installation