HP D5970A - NetServer - LCII Manual page 6

Mass storage upgrade kit guide

Hide thumbs Also See for D5970A - NetServer - LCII:

Table of Contents

Chapter 1

This guide uses the following names for rack enclosures:

HP Rack: This guide's designation for all of the following rack enclosures:

HP Systems rack enclosure product numbers J1487B and J1487A

HP Rack System/E rack enclosure product numbers J1500A, J1501A,

J1502A

HP Rack System/U rack enclosure product numbers J1464A and

J1466A

Compaq Rack: This guide's designation for the Compaq

enclosures

NOTE

The instructions in this guide are specifically for HP rack

enclosure product numbers J1464A, J1466A, J1487B, J1488A,

J1500A, J1501A, and J1502A and the Compaq

Racks.

For information about other rack installations, see the rack-

mount kit instructions that come with your rack or NetServer,

or refer to the following web site:

http://www.hp.com/go/enclosures

Chapter 2 of this guide tells how to install the second hot-swap mass storage cage,

its SCSI cable, and the disk drive modules, as shown in Figure 1-2.

Introduction

4000/7000 rack

4000/7000

Table of Contents