Step 11: Reconnect Power Cord(S) And Other Cables - HP D5970A - NetServer - LCII Manual

Chapter 2
Step 11: Reconnect Power Cord(s) and Other
Cables
1. Reconnect the AC power cord(s) and any other external cables.
2. Attach the power cord retainer for each AC power cord, as shown in
Figure 2-32. Lift the metal piece underneath, squeeze the two long metal
tabs toward each other, and slide the wire bail over the tabs.
Wire Bail of
Retainer
Figure 2-32. Attach Power Cord Retainer
Two Long Tabs
on Retainer
Power Cord
Installation
41