HP D5970A - NetServer - LCII Manual page 7

Chapter 1
I/O Board
Figure 1-2. Secondary Hot-Swap Mass Storage Cage and SCSI Cable
Chapter 3 tells how to configure the disk drives in non-RAID configuration (also
called "JBOD," or "Just a Bunch of Disks" configuration), which is the factory
default mode.
Appendix A tells where to find information on configuring the disk drives in
RAID configuration under control of the integrated HP NetRAID controller.
Appendix B contains warranty and support information, and Appendix C contains
regulatory information.
Channel B (Secondary)
SE Connector
Channel B
(Secondary)
SCSI B Connector
SCSI A Connector
SCSI Cable for
Secondary Hot-Swap
Mass Storage Cage
Secondary
(SCSI B)
Secondary Hot-Swap
Hot-Swap
Mass Storage Cage
Disk
Drives
Left Drive Bay
(Secondary)
Introduction
Non-Hot-Swap
SCSI Devices
Channel A
(Primary)
Primary
(SCSI A)
Hot-Swap
Disk
Drives
Right Drive Bay
(Primary)
3