Preparing The Hp Netserver For Rack-Mounting; Introduction; Tools Required - HP D7171A - NetServer - LPr Manual

1 Preparing the HP NetServer for
Rack-Mounting

Introduction

This chapter describes how to remove the top cover and the pedestal from the
HP NetServer LC.
WARNING

Tools Required

l
An anti-static service kit (3M 8501/8502/8503 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.
Before removing the top cover, shut down the operating
system and disconnect the power cords and unplug telephone
cables. Disconnect the power cords to avoid exposure to
high energy levels that may cause burns when parts are
short-circuited by metal objects, such as tools or jewelry.
Disconnect telephone cables to avoid exposure to a shock
hazard from telephone ringing voltages.
1