Exit Hp Netraid Assistant - HP D5970A - NetServer - LCII Configuration Manual

Chapter 8
NOTE
You cannot leave the current server-adapter pair if any
operations--such as Performance Monitor or the rebuilding or
reconstruction of a drive--are running in Full Access mode.
You cannot change from View Only mode to Full Access
mode. Instead, exit HP NetRAID Assistant and restart. Choose
the server and Full Access mode. Then enter the password.
When selecting a new server in Full Access mode, a dialog box appears. Enter
the new server's password, which is case-sensitive. The new server cannot be
accessed if it is already being managed by a system in Full Access mode, or if
either of the following utilities are running on the new server:
HP NetRAID Assistant
HP NetRAID Config

Exit HP NetRAID Assistant

Exit HP NetRAID Assistant by choosing Exit from the Configuration menu, or
by clicking the Exit button in the toolbar, or by double-clicking the upper-left
corner of the main window.
Managing Servers Over the Network
89