Make The Installation Disk If Necessary; Microsoft Windows Nt Client Or Server Installation Instructions - HP D5970A - NetServer - LCII Configuration Manual

Integrated hp netraid controller configuration guide
Hide thumbs Also See for D5970A - NetServer - LCII:
Table of Contents

Advertisement

Chapter 8

Make the Installation Disk if Necessary

The files needed to install the HP NetRAID Network utilities can be found on the
following utilities diskette(s) created by the HP NetServer Navigator CD-ROM:
For Microsoft Windows NT and Windows 95, there are two diskettes
titled "NetRAID Assistant for Windows NT and Windows 95."
For Novell NetWare, there is one diskette titled "NetRAID Utilities for
NetWare."
If you do not have these diskettes, you can generate them using the HP NetServer
Navigator CD-ROM.
1. Turn on the HP NetServer and monitor, and insert the HP NetServer
Navigator CD-ROM into the drive. Turn off the HP NetServer power, wait
10 seconds, and turn it back on again.
2. Go to the HP Navigator Main Menu, and choose NetServer Utilities.
3. Select More NetServer Utilities.
4. From the NetServer Utilities menu, select Diskette Library.
5. From the Diskette Library, do the following
For Windows NT, select NetRAID Assistant for Windows NT and
Windows95.
For NetWare, select NetRAID Utilities for NetWare.
6. Follow the onscreen instructions to create the diskette.
7. When the diskette is complete, remove the HP NetServer Navigator
CD-ROM and click Exit to reboot the HP NetServer.
Microsoft Windows NT Client or Server
Installation Instructions
For each client or server operating under Microsoft Windows NT, or for each
client running under Windows 95, run Setup and then follow the on-screen
instructions to install the appropriate utilities.
82
Managing Servers Over the Network

Advertisement

Table of Contents
loading

Table of Contents