Define Logical Drives - HP D5970A - NetServer - LCII Configuration Manual

Chapter 5
3. Click the Dedicated to button, and then click on the down arrow to
display a list of valid arrays.
4. Click the array to which you want to dedicate the hot spare.
5. Click OK.
6. Continue defining arrays and hot spares.
To reclaim (undo) one or more hot spares:
1. Select one or more hot spares in the Logical Devices box.
2. Click the Reclaim button to convert the hot spares to Ready physical
drives.
When you are finished defining arrays and hot spares:
Click the Next button.

Define Logical Drives

NOTE
Refer to Worksheet B when defining logical drives.
After you finish defining arrays and hot spares, and click Next, the HP NetRAID
Assistant Wizard Logical Drive Definition window appears. A sample window is
shown in Figure 5-5. The window is ready for you to define Logical Drive 0.
Configuration
49