Hp Netraid Software; Overview; Step H. Decide Which Hp Netraid Drivers You Need - HP D5970A - NetServer - LCII Configuration Manual

6 HP NetRAID Software

Overview

In this chapter you will complete the next five steps of the configuration:
In Step H, you choose whether you want to use I
HP NetRAID drivers
In Step I, you use the HP NetServer Navigator CD-ROM to prepare the
diskettes needed to install the NOS, HP NetRAID drivers, and the
HP NetRAID NOS-specific utilities
In Step J, you install the network operating system (NOS) if necessary and
the appropriate HP NetRAID drivers
In Step K, you install the NOS-specific configuration utility you need to
manage your HP NetRAID system
In Step L, you run HP NetRAID Express Tools (optional)
Step H. Decide Which HP NetRAID Drivers You
Need
Before you begin to install your software, you must decide which set of drivers
you need. Non-I O drivers are provided for all network operating systems
2
supported by the integrated HP NetRAID controller. In addition, I
available for selected network operating systems.
The data stored using I
I O drivers.
2
This chapter contains complete instructions on installing non-I
are installing non-I
Information about I
information on which operating systems are supported with I
on installing I O drivers, see the HP web site at
2
www.hp.com/go/netserver.
O drivers is fully compatible with data stored using non-
2
O drivers, see Step I next in this chapter.
2
O drivers are not included in this guide. For complete
2
O or non-I O
2 2
O drivers are
2
O drivers. If you
2
O and instructions
2
57